Siemens 6GK7242-7KX30-0XE0 ユーザーズマニュアル
CP 1242-7
Operating Instructions, 03/2012, C79000-G8976-C247-03
Operating Instructions, 03/2012, C79000-G8976-C247-03
81
Service and maintenance
6
6.1
Diagnostics
Diagnostics options
You have the following diagnostics options available for the module:
● The LEDs of the module
● The LEDs of the module
For information on the LED displays, refer to the section LEDs (Page 20).
● STEP 7: The "Diagnostics" tab in the Inspector window
Here, you can obtain the following information on the selected module:
– Entries in the diagnostics buffer of the CPU
– Information on the online status of the module
– Entries in the diagnostics buffer of the CPU
– Information on the online status of the module
● STEP 7: Diagnostics functions in the "Online > Online and diagnostics" menu
Here, you can obtain static information on the selected module:
– General information on the module
– Diagnostics status
– Information about the telecontrol interface:
– General information on the module
– Diagnostics status
– Information about the telecontrol interface:
- Network
- Ethernet interface
- Statistics
You can obtain further information on the diagnostics functions of STEP 7 in the STEP 7
online help.
6.2
Downloading firmware
New firmware versions
If a new firmware version is available for the module, you will find this on the Ethernet pages
of the Siemens Automation Customer Support under the following ID:
45605894 (
45605894 (
)
On the Internet page, select the "Entry list" tab and the "Download" entry type. You will find
the firmware file and a description of the procedure there.
You can recognize that firmware is being loaded by the flashing LEDs of the CP, see section
You can recognize that firmware is being loaded by the flashing LEDs of the CP, see section