Hitachi hard disk 0J11285 500 GB 2.5 " 8 MB 0J11285 データシート
製品コード
0J11285
Z5K500 OEM Specifications
168
14.54 Write Sector(s) (30h/31h)
Command Block Output Registers
Command Block Input Registers
Register
7 6 5 4 3 2 1 0 Register
7 6 5 4 3 2 1 0
Data
- - - - -
-
-
- Data
- - - - - -
-
-
Feature
- - - - -
-
-
- Error
...See
Below...
Sector Count
V V V V V V V V Sector Count
V V V V V V V V
LBA Low
V V V V V V V V LBA Low
V V V V V V V V
LBA Mid
V V V V V V V V LBA Mid
V V V V V V V V
LBA High
V V V V V V V V LBA High
V V V V V V V V
Device
- L - - H H H H Device
- - - - H H H H
Command
0 0 1 1 0 0 0 R Status
...See
Below...
Error Register
Status Register
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
CRC UNC 0
IDN
0
ABT T0N AMN BSY RDY
DF
DSC DRQ COR IDX ERR
0 0 0 V 0 V 0 0
0 V V V - 0 0 V
Table 138 Write Sector(s) Command (30h/31h)
The Write Sector(s) command transfers one or more sectors from the host to the device, then the data is
written to the disk media.
The sectors are transferred through the Data Register 16 bits at a time.
If an uncorrectable error occurs, the write will be terminated at the failing sector, when the auto reassign
function is disable.
written to the disk media.
The sectors are transferred through the Data Register 16 bits at a time.
If an uncorrectable error occurs, the write will be terminated at the failing sector, when the auto reassign
function is disable.
Output Parameters To The Device
Sector Count
Sector Count
The number of continuous sectors to be transferred. If zero is specified, then 256
sectors will be transferred.
sectors will be transferred.
LBA Low
The sector number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1)
H
The head number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
R
The retry bit, but this bit is ignored.
Input Parameters From The Device
Sector Count
Sector Count
The number of requested sectors not transferred. This will be zero, unless an
unrecoverable error occurs.
unrecoverable error occurs.
LBA Low
The sector number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
H
The head number of the last transferred sector. (L=0)In LBA mode, this register
contains current LBA bits 24 - 27. (L=1)
contains current LBA bits 24 - 27. (L=1)