Canon DR-C225W 9707B003 マニュアル
製品コード
9707B003
31
Placing Cards
###HOME > Chapter 5 Placing Documents > Placing Cards###
1
Set the feed selection lever and the eject selection lever.
Set the feed selection lever to the non separation position (upper position). The
feed selection indicator will light orange.
feed selection indicator will light orange.
Set the eject selection lever to the straight path position ( ).
2
Adjust the document guides to fit the width of the card to be scanned.
3
Place the card horizontally with the top edge facing upward.
z
Place the card one at a time.
z
If you place cards to be fed vertically, they may not be ejected
properly, and cards that get jammed may be damaged when you
remove them. Take care of the orientation when placing cards.
properly, and cards that get jammed may be damaged when you
remove them. Take care of the orientation when placing cards.
z
Ultrasonic double feed detection will not function properly when
scanning cards. Clear the [Detect by Ultrasonic] check box in
the [Feeding] tab.
scanning cards. Clear the [Detect by Ultrasonic] check box in
the [Feeding] tab.