ION Audio LP2CD データシート

 

 

 

The LP 2 CD features an Internal Flash Player.  This player is used to rip music from the turntable or from an 
external source connected to the line inputs on the rear of the unit.  The process is illustrated below: 
 
 

 

 
 
 
 
You might ask “why not burn my music directly to CD?”  There are a couple of reasons why we have chosen 
this approach: 
 

 

Recording to the Internal Flash Player first allows you to correct any mistakes and perfect your track 
transitions before committing your recording to a CD. 

 

The spinning of a CD drive produces mechanical noise which can leak into your recordings.  Recording 
to the Internal Flash Player prevents this noise from entering your recordings, ensuring the highest 
possible audio fidelity.   

 
 
 

 

1.

 

First,  make sure that you are in Internal Flash 
Player Mode (an orange LED next to “INT” should be 
lit).  If the unit is in CD Player Mode (green LED next to 
“CD”), press [MENU] once and press [YES] when you 
see the screen shown on the right to switch to Internal 
Flash Player Mode. 

2.

 

Select which source you would like to record by flipping the PHONO / LINE switch to the 
appropriate position.  Set the switch to PHONO if you would like to record vinyl from the turntable 
platter, or set the switch to LINE if you would like to record from an external source, such as a tape or 
personal music player, connected to the LINE IN on the rear of the LP 2 CD. 

3.

 

Press the [RECORD] button.  The red LED below the 
button will begin to blink to let you know that you are 
ready for recording and you will see the screen 
displayed on the right.  The number after ‘INT’ is the 
location where the recording will be saved. 

4.

 

Cue the music which you would like to record.  If 
recording vinyl from the turntable platter, put the 
needle on the vinyl record, at the beginning of the 
section which you would like to record. 

5.

 

Play the music which you would like to record.  If recording vinyl from the turntable platter, press 
the turntable’s [START/STOP] button to begin playing the record. 

INT:01 PressPLAY 

 

 

 

Menu: Switch to 

 

 Flash Player?