ION Audio LP2CD データシート

ページ / 92
 
 
13 
 
FREQUENTLY ASKED QUESTIONS  
 
Question: 
Can I record from the turntable and from external audio sources simultaneously? 
Answer: 
No.  The LP 2 CD can only record from the turntable or from audio sources connected 
to the Line In inputs, but not both simultaneously.  This is to prevent unwanted mixing 
of audio signals.  The Phono / Line switch selects which source will be routed to the 
internal recorder. 
 
Question: 
Can I burn my vinyl records directly to CD? 
Answer: 
You will need to record your music to the unit’s Internal Flash Player before you can 
burn it to a CD.  This approach allows you to correct any mistakes and perfect your 
track transitions before committing your recording to a CD.  It also as ensures that the 
spinning of the CD drive does not introduce mechanical noise into your recordings. 
 
Question: 
What CD formats is the LP 2 CD compatible with? 
Answer: 
The LP 2 CD can play music from virtually any CD containing audio data.  The LP 2 
CD can only record music to Audio CD-R.  Please ensure that the CD you wish to 
record contains the proper “Digital Audio Recordable” logo. 
 
Question: 
How much data can the Internal Flash Player hold? 
Answer: 
The Internal Flash Player on the LP 2 CD can hold about 700Mb of data; this equals 
roughly 80 minutes of music.  Please note, however, that the Internal Flash Player 
also has a 99 track limit.  We recommend that you wipe the player contents after each 
successful transfer to CD.    
 
Question: 
Can I listen to my music while recording it? 
Answer: 
Yes, you can listen to your music while recording by connecting the unit’s Line Out to 
a line-level input on a home stereo receiver.  Alternatively, you can connect 
headphones to the 1/8” headphone jack on the lower right corner of the top panel. 
   
Question: 
Can I record audio from other devices? 
Answer: 
Yes, you can record audio to the unit’s Internal Flash Player from virtually any line-
level audio source, such as tape or reel-to-reel players, connected to the Line In on 
the rear panel.   
 
Question: 
What is the purpose of the USB port? 
Answer: 
The USB port allows you to connect the turntable to your computer and use the 
included software to transfer music from vinyl or external line-level audio sources 
directly to digital music.  Please consult the included MixMeister Vinyl Converter 
Software Guide for information on recording audio from the LP 2 CD into your 
computer. 
 
Question: 
Do I need special software drivers when connecting the LP 2 CD to my computer? 
Answer: 
No, the LP 2 CD is a plug-and-play device.  This means that there are no special 
drivers to install.  When you connect the unit to your computer for the first time, it will 
automatically load all the necessary components onto your system. 
 
Question: 
With what operating systems is the LP 2 CD compatible? 
Answer: 
The LP 2 CD is a plug-and-play device under Windows XP/Vista and Mac OSX 
operating systems.  If you would like to transfer your music to your computer, please 
refer to the MixMeister Vinyl Converter Software Guide.