Samsung CLX-3305 データシート

ページ / 314
30
1. Introduction
Installing the driver locally
A locally connected machine is a machine directly attached to your computer 
using the cable. If your machine is attached to a network, skip the following 
steps below and go on to installing a network connected machine’s driver (see 
 
If you are a Macintosh or Linux operating systems user, refer to the 
"Installation for Macintosh" on page 145
The installation window in this 
User’s Guide
 may differ depending on the 
machine and interface in use.
Only use a USB cable no longer than 3 meters (118 inches).
 
14 
Windows
1
Make sure that the machine is connected to your computer and 
powered on.
 
If the “Found New Hardware Wizard” appears during the installation 
procedure, click Cancel to close the window.
 
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs > 
Accessories > Run.
 X:\Setup.exe replacing “X” with the letter, which represents your CD-
ROM drive and click OK.
Select Install Now.
Follow the instructions in the installation window.