Philips Bluetooth mono headset SHB1400 SHB1400/00 データシート

10 EN

7  Use the headset

Connect the headset to a mobile phone

1

  With the mobile phone turned on, press   until the LED lights 

up, to turn on the headset. 

Once turned on, the headset reconnects automatically to 

 

»

the last device it was connected to. 
If the last connected device is not available, the headset 

 

»

tries to reconnect to the second to last device that was 

connected to the headset. If it cannot find this device, it 

will look for all previously paired devices in the order of 

last usage, until it finds a device to connect to. The headset 

stores up to 8 previously paired devices.

If you turn on the mobile phone or its Bluetooth feature after turning 

on the headset, connect the headset from your mobile phone’s 

Bluetooth menu.

Automatic power saving

If the headset cannot find any Bluetooth device to connect to in 

range within five minutes, it automatically powers down to save 

battery life.

Control your calls

Turn the headset on/off Press   until the LED turns on/off.
Check battery

Hold VOL + and VOL - simultaneously.

> 50%: 1 blue flash

< 50%: 2 red flashes

< 25%: 3 red flashes

Pick up/end a call

Press  .

Adjust Volume

Press VOL +/VOL -.

Redial the last number Press   twice quickly.
Reject a call

Hold  .

Activate voice dialing

Hold   until beep occurs.

Transfer a call to a 

mobile phone

Hold   during a call.

Mute the Mic

Press   twice quickly during a call.

Manage 3-way calls

If your mobile phone and network operator support 3-way-calls, you 

can manage 3-way-calls via the headset.

To hold the active call and 

accept a waiting call

Press   while the 2nd call is 

coming in.

To drop the active call and 

accept a waiting call

Hold   while the 2nd call is 

coming in.

To swap the active call and the 

call on hold

Press   during a call.

To drop the active call and 

accept the call on hold

Hold   until a beep sound 

occurs.

To drop the call on hold

Press   and VOL - until a beep 

sound occurs.

To add the call on hold to an 

active call

Press   and VOL + until a beep 

sound occurs.

LED and sound indication

The red/blue LED flashes alternately. The headset is ready for 

pairing.

The blue LED flashes once every 3 

seconds.

The headset is connected 

to the phone.

The red LED flashes twice every 3 

seconds.

The headset is not 

connected.

The blue LED flashes once every half 

a second.

There is an incoming/

outgoing call.

The blue LED flashes once every 

second.

The headset is active on 

a call.

The red LED flashes three times and 

beeps twice every minute.

The battery is low in 

power.

Solid red LED

The headset is charging.

The LED is off.

The headset is off./Charging 

is finished.

The headset beeps every 5 seconds The Mic is muted.