Creative Wireless Adapter CB3200 ユーザーズマニュアル

 

38

−  Empty field – the service is not connected. 
−  A device name and Bluetooth Device Address – identifies 

the device that is using the service. 

At times you need to interrupt a connection from the server side. To do this, right-click the 
local service and then select Stop from the pop-up menu. To restart the service later, right-
click the local service and then select Start. 

 

The Hardware tab provides basic information about the Bluetooth hardware installed in this 
computer. In some cases, it allows you to have access to the Advanced Settings dialog box. 
In this tab, you will see the following sections: 
 
Devices: 
 

ƒ  Name: the name of the device, e.g., Bluetooth Device. 
ƒ  Type: the type of device you have, e.g., USB. 

 
Device Properties: 
 

ƒ  Device Status: indicates if the device is operating properly or if there is a 

problem or conflict. 

ƒ  Manufacturer: the name of the company that made the device you selected in 

the Devices section of this dialog box. 

ƒ  Firmware Revision: the manufacturer’s firmware version 

number. 

ƒ  Device Address: displays the Bluetooth Device Address (BDA or BD_Addr) 

programmed into this device when it was manufactured. 

ƒ  HCI Version: the version number of the Bluetooth Specification that the Host 

Controller Interface (HCI) complies with.  

ƒ  HCI Revision: the revision number of the Bluetooth Specification that the Host 

Controller Interface (HCI) complies with. 

ƒ  LMP Version: the version number of the Bluetooth Specification that the Link 

Manager Protocol (LMP) complies with. 

ƒ  LMP Sub Version: the sub-version number of the Bluetooth Specification that 

the Link Manager Protocol (LMP) complies with. 

Click Apply to save the changes – the changes will be applied the next time you restart your 
Bluetooth device.