Pelican Water Dispenser WHWF 1354 ユーザーズマニュアル

Custom Rev C —
Pelican Custom Premium WHWF 1354 / 1665

Page 4

www.pelicanwater.com

(877) 842-1635

Product Operation and Specifications

Important Information

 Read these instructions carefully and determine the location of all system components before

beginning installation.

 Check all applicable plumbing, building, and electrical codes for installation compliance.
 Install the system on the main water supply.
 Systems that contain electronic components cannot be installed outside in uncovered areas.

!IMPORTANT!

Your system will not be ready for use for a minimum of 48 hours while the Carbon Soak process takes

place. Please plan your install accordingly.

WARNING:

If this or any other system is installed in a metal (conductive) plumbing system, i.e. copper or

galvanized metal, the plastic components of the system will interrupt the continuity of the

plumbing system. As a result any errant electricity from improperly grounded appliances

downstream or potential galvanic activity in the plumbing system can no longer ground

through contiguous metal plumbing. Some homes may have been built in accordance with

building codes, which actually encouraged the grounding of electrical appliances through the

plumbing system. Consequently, the installation of a bypass consisting of the same material

as the existing plumbing, or a grounded "jumper wire" bridging the equipment and re-

establishing the contiguous conductive nature of the plumbing system must be installed prior

to your systems use.

CAUTION:

When adding a filtration/softening system to homes/buildings supplied by well water, the system should be
installed following the pressure tank. DO NOT USE this system for pneumatic or hydro pneumatic

applications. If you are using a booster pump, then install this system following the booster

pump. If you have questions, please call customer service.

Specification Description

1354

1665

Rated Service Flow

20 GPM

25 GPM

Minimum Working Pressure

25 PSI

Maximum Working Pressure

80 PSI

Maximum Vacuum

5 inch/127 mm Hg

Operating Temperatures

36°F - 120°F

pH Range

6 - 11