Vermont Castings 3421 プリント

  If a poor seal is apparent after you have installed a 

new gasket, and it cannot be corrected with door or 
latch adjustment, it may be necessary to insert shim 
gaskets under the new gasket or to take other cor-
rective actions. Your dealer can provide the neces-
sary materials and advice.

  The stove’s door may need adjustment after you 

have installed a new gasket. Initially, it may require 
loosening to accommodate the new gasket; after a 
few weeks, it may need tightening to compensate for 
the gasket compressing.

  You adjust the door by removing or adding wash-

ers to the door latch mechanism. If the door must 
be loosened after installing a new gasket, remove 
washer. For a tighter fit, add washers. To remove or 
add washer, open the door, remove the allen-head 
button screw that attaches the door latch tab to the 
stove front, and remove the tab. Add or remove 
washers as needed, and save any washers you re-
move for future use. Replace the door latch tab and 
secure it with the allen-head button screw.

Most carbon deposits will burn off the glass during nor-
mal use. Constant deposits on the glass indicate low, 
smoky fires. However, if you wish to clean the glass 
panel, use only a cleaner made especially for cleaning 
stove glass. Your dealer can supply this.

149 Cleveland Drive • Paris, Kentucky 40361

www.mhsc.com