BMW 2004 645Ci Coupe オーナーマニュアル

ページ / 216
 179
High beams, parking lamps 
The illustration shows the front left side of 
the engine compartment.
High beams
Bulb 55 watts, H 7
1.
Remove the cover cap 1 by pressing 
the tab and removing the cover cap 
upward
2.
Press the bulb holder from above to 
release it
3.
Remove the bulb holder
4.
Remove and replace the bulb.
Parking lamps
Bulb 10 watts
Bulb holder and reflector are one unit 
and are replaced together.
<
1.
Turn the bulb holder 2 to the right and 
remove
2.
Press the detent on the plug connector, 
pull off the bulb holder and replace.
Front turn signal, sidemarker 
Your BMW is equipped with two turn signal 
lamps per side in the front. Turn signal 
lamp 1 can be replaced via the engine 
compartment, and turn signal lamp 2 via 
the wheel well.
Turn signal lamp 1 
Bulb 21 watts, WY 21 SV
The illustration shows the front right side of 
the engine compartment.
1.
The lever shown:
>
Right turn signal: press downwards
>
Left turn signal: press upwards
2.
Remove the bulb holder towards the 
rear
3.
Remove and replace the bulb.
Turn signal lamp 2 
Bulb 21 watts, WY 21 SV
The bulb of the turn signal lamp 2 can be 
replaced via a cover at the front of the 
wheel well.
The illustration shows the left side of the 
vehicle.
1.
Turn the steering all the way to lock to 
obtain access to the cover, refer to 
illustration
2.
Remove the cover by unscrewing the 
two bolts with an open-end wrench 
from the onboard tool kit
3.
Location of the bulb holder of turn sig-
nal lamp 2, refer to arrow
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG