AMANO PIX-3000XNT - Enterprise Solution 操作ガイド
PIX-3000x Operations Manual
13
Switching the Order of Month, Date, and Year
DIP Switches #7 and #8 allow you to control the order of the Month,
Date, and Year on the printout. The following switch configurations will
print out the Month, Date, and Year in the order shown.
Date, and Year on the printout. The following switch configurations will
print out the Month, Date, and Year in the order shown.
Right or Left Print
DIP Switch #9 enables you to left or right justify the printout. If it is set to
OFF, the printout will be left justified. When it is set to ON, the printout
will be right justified.
OFF, the printout will be left justified. When it is set to ON, the printout
will be right justified.
Dimension A:
Requires 45 mm (1.8”) or more when dimension C
is less than 60 mm (2.4”).
is less than 60 mm (2.4”).
Dimension B:
Possible to set up at 0 mm - 30 mm (0" - 1.2").
Dimension C:
Requires 60 mm (2.4") or more when dimension A
is less than 45 mm (1.8").
is less than 45 mm (1.8").
Dimension D:
Refer to the DIP Switch Settings Length.