AMANO PIX-3000XNT - Enterprise Solution 操作ガイド
20
PIX-3000x Operations Manual
Automatic Numbering
Initial Number Set
The PIX-3000x can automatically add a sequential number to each
printout.
The Initial Number Set defines the number at which the automatic
numbering will begin.
printout.
The Initial Number Set defines the number at which the automatic
numbering will begin.
1. After entering the program mode,
move the cursor under “INITIAL
NUMBER SET".
NUMBER SET".
2. Press
ENTER to start the
sequence.
3. The first digit will begin to flash.
Press the
CHANGE button until the
correct first digit appears in the
display, then press
display, then press
ENTER.
4. The second digit will start
flashing. Press the
CHANGE button
until the correct digit appears in
the display, then press
the display, then press
ENTER.
5. Continue Steps #3 and #4 until all
digits have been programmed.
Upon entering the last digit, press
ENTER.
Upon entering the last digit, press
ENTER.
6. The entire display will begin
flashing. If correct, press
ENTER. If
not, press the
CHANGE button and
return to Step #3.