Fuji Bikes Cyber-Relax AS-888 ユーザーズマニュアル

 

31 

 

You may hear the following noises or detect some 
feeling as described below during operation. However, 
these are not errors but inherent to the product so that 
the service life, or others will not be affected. 
•  Clatters produced by the knead balls moving up or 

down 

•  Noise of gears or motor during massaging movement 
•  Sound of rustling between the knead balls and the 

cloth (particularly during KNEAD movement) 

•  Rattling noise during the TAPPING or WAVELET 

movement (particularly during movement from the 
shoulder to the back) 

•  Speed of massaging movement may vary during 

KNEAD, TAPPING or WAVELET depending on the 
force of reaction against kneads balls. 

•  Difference of noise after changing the “SPEED” setting 

(Metallic noise during the slow speed) 

•  Beat from motor at application of load 

•  Noise released when the knead balls are moved fore 

and after automatically to adjust to the person during 
the AUTO COURSE (Clicks) 

•  Breathing noise of exhaust during pneumatic 

movement 

•  Sound produced from inflating air bags 

 

Phenomenon 

Inspection Point 

Remedy 

Reference Page

Is the power cord plug inserted 
properly? 

Insert the plug in the receptacle 
securely. 

8, 16, 24 

Check if the power switch at 
the back of arm rest is turned 
on. 

Turn ON the power switch. 

8, 16, 24 

Failure to start 

Did you specify massaging 
functions by pressing 
corresponding switches for the 
AUTO COURSE and the 
selective function? 

Select desirable functions by 
pushing corresponding 
switches. 

16, 24 

Check the back rest for 
interference with the wall or 
other obstruction. 

Move the chair to avoid 
obstruction. 
Turn OFF the power switch 
located at the back of arm chair 
and back on again. 

13, 16, 24 

Interrupted 
movement 
(Remote control 
is disabled.) 

Check for excessive load. 
(Excessive load on the knead 
balls activates the safety 
mechanism to stop all 
functions.) 

Separate your body from the 
back rest. Turn “OFF” the 
power switch located at the 
back of arm chair and back 
“ON” again. Try to set again 
from the start. 

8, 16, 24