First Alert PRO-D1610 ユーザーズマニュアル

Page  41

Appendix

Hard Drive

Hard Drive Removal and Installation

To replace the hard drive in the DVR:
1.  CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. 

UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM 
THE DVR BEFORE REMOVING COVER. FAILURE TO DO SO 
CAN RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS 
AS WELL AS INJURY OR DEATH

1.  Remove screws securing the cover of the DVR and remove 

cover

2.  Disconnect the hard drive power and data cables
3.  Remove the screws securing the hard drive to the chassis.
4.  Remove old hard drive and replace with the new one.
5.  Re-install the screws securing the hard drive to the chassis.
6.  Re-connect the hard drive power and data cables.
7.  Replace the cover and screws. Note: Format hard drive per 

instructions in HDD MANAGEMENT section.

Caution!

When working with electrostatic sensitive 
devices such as hard disk or DVR 
unit, make sure you use a static-free 
workstation. Any electrostatic energy 

coming in contact with the hard disk or DVR can damage 
it permanently. 

Hard Drive Format

NOTE: A new hard drive must be formatted 
after installation. Format per instructions 
in the HDD MANAGEMENT section of this 
manual.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. 

UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM 

THE DVR BEFORE REMOVING COVER. FAILURE TO DO SO CAN 

RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS AS 

WELL AS INJURY OR DEATH.

The lightning flash with arrowhead symbol, within an equilateral 
triangle, is intended to alert the user to the presence of un-insulated 
“dangerous voltage” within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle, is intended to 
alert the user to the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the appliance.