Johnson Controls M9220-GGX-3 ユーザーズマニュアル
M9220-GGx-3 Proportional Electric Spring Return Actuators Installation Instructions
3
Accessories
Mounting
The M9220-GGx-3 Proportional Electric Spring Return
Actuators can be easily installed on dampers with 1/
2 to 3/4 in. or 12 to 19 mm round shafts, or 3/8 and 1/
2 in. or 10, 12, and 14 mm square shafts. An M9220-
600 Jackshaft Coupler Kit is available for 3/4 to 11/
16 in. or 19 to 27 mm round shafts, or 5/8 and 3/4 in. or
16, 18, and 19 mm square shafts; see Table 1 for more
details. If the damper shaft extends less than 3-19/32
in. (91 mm), see the Removable Coupler section for
further instructions. If the damper shaft extends less
than 1-5/32 in. (29 mm), install an extension
recommended by the damper manufacturer.
Actuators can be easily installed on dampers with 1/
2 to 3/4 in. or 12 to 19 mm round shafts, or 3/8 and 1/
2 in. or 10, 12, and 14 mm square shafts. An M9220-
600 Jackshaft Coupler Kit is available for 3/4 to 11/
16 in. or 19 to 27 mm round shafts, or 5/8 and 3/4 in. or
16, 18, and 19 mm square shafts; see Table 1 for more
details. If the damper shaft extends less than 3-19/32
in. (91 mm), see the Removable Coupler section for
further instructions. If the damper shaft extends less
than 1-5/32 in. (29 mm), install an extension
recommended by the damper manufacturer.
Table 1: Accessories and Replacement Parts (Order Separately)
Code Number
Description
DMPR-KC003
1
7 in. (178 mm) Blade Pin Extension (without Bracket) for Johnson Controls Direct-Mount Damper
Applications
Applications
M9000-200
Commissioning Tool that Provides a Control Signal to Drive 24 V On/Off, Floating, Proportional,
and/or Resistive Electric Actuators
and/or Resistive Electric Actuators
M9000-153
Crank arm
M9000-158
Tandem Mounting Kit used to Mount Two Models of M9210/20 Proportional Electric Spring Return
Actuators
Actuators
M9000-170
Remote Mounting Kit, Horizontal. Kit includes Mounting Bracket, M9000-153 Crank Arm, Ball Joint,
and Mounting Bolts
and Mounting Bolts
M9000-171
Remote Mounting Kit, Vertical. Kit includes Mounting Bracket, M9000-153 Crank Arm, Ball Joint, and
Mounting Bolts
Mounting Bolts
M9000-320
Weather Shield Enclosure - NEMA 3R enclosure for protecting a single M9210/20 from rain, sleet, or
snow.
snow.
M9000-604
Replacement Anti-rotation Bracket Kit (with Screws) for M9210-xxx-3 Series Proportional Electric
Spring Return Actuators
Spring Return Actuators
M9220-600
1 in. (25 mm) Jackshaft Coupler Kit (with Locking Clip) for Mounting M9210-xxx-3 Series Proportional
Electric Spring Return Actuators on Dampers with 3/4 to 1-1/16 in. or 19 to 27 mm Round Shafts, or
5/8 and 3/4 in. or 16, 18, and 19 mm Square Shafts
Electric Spring Return Actuators on Dampers with 3/4 to 1-1/16 in. or 19 to 27 mm Round Shafts, or
5/8 and 3/4 in. or 16, 18, and 19 mm Square Shafts
M9220-601
Replacement Coupler Kit (with Locking Clip) for Mounting M9210-xxx-3 Series Proportional Electric
Spring Return Actuators on Dampers with 1/2 to 3/4 in. or 12 to 19 mm Round Shafts, or 3/8 and 1/
2 in. or 10, 12, and 14 mm Square Shafts
Spring Return Actuators on Dampers with 1/2 to 3/4 in. or 12 to 19 mm Round Shafts, or 3/8 and 1/
2 in. or 10, 12, and 14 mm Square Shafts
M9220-602
Replacement Locking Clips for M9210-xxx-3 Series Proportional Electric Spring Return Actuators
(Five per Bag)
(Five per Bag)
M9220-603
Adjustable Stop Kit for M9210-xxx-3 Series Proportional Electric Spring Return Actuators
M9220-604
Replacement Manual Override Cranks for M9210-xxx-3 Series Proportional Electric Spring Return
Actuators (Five per Bag)
Actuators (Five per Bag)
M9220-610
Replacement Shaft Gripper, 10 mm Square Shaft with Locking Clip
M9220-612
Replacement Shaft Gripper, 12 mm Square Shaft with Locking Clip
M9220-614
Replacement Shaft Gripper, 14 mm Square Shaft with Locking Clip
1.
Furnished with the damper and may be ordered separately.