Whirlpool Washer Cabrio Top-Loading High Efficiency Low-Water Washer オーナーマニュアル

Press to turn the washer ON. Pressing once while the 

washer is on will cancel the current cycle, pressing twice  

will turn the washer OFF.

Turn the Wash Cycle knob to select a cycle for your laundry 

load. See “Cycle Guide” for detailed descriptions of cycles.

The Estimated Time Remaining display shows the time 

required for the cycle to complete. Factors such as load  

size and water pressure may affect the time shown in 

the display. Tightly packed loads, unbalanced loads, or 

excessive suds may cause the washer to adjust the cycle 

time, as well. 
If you have set a delay start to the cycle, the Estimated  

Time Remaining display will show the delay time adjusted.  
When the cycle is complete, the Done indicator will light  

until the lid is opened. 
The Lid Lock indicator lights up when the lid is locked  

and cannot be opened. If you need to open the lid,  

press START/PAUSE. The lid will unlock once the washer  

movement has stopped. This may take several minutes  

if the load was spinning at high speed. Press START/ 

PAUSE again to restart the cycle.

Your washer is specially designed to conserve energy  

and water. Each cycle, along with any selected options,  

will result in different energy and water usage. To use  

the Eco Monitor, choose the best cycle for the load being 

washed, then adjust temperature and spin speed options  

to improve the energy usage within that cycle. 

Press to start the selected cycle; press again to pause  

a cycle. 

You may add or remove options for each cycle. Not all  

options can be used with all cycles, and some are preset  

to work with certain cycles. 

The EcoBoost

 option allows you to increase your  

energy savings on your wash cycles. When this option  

is used, the wash cycle will use cooler wash water than 

the selected cycle and may increase the spin speed  

for faster drying. 

This option can be used to automatically add a second 

rinse to most cycles.
DEEP CLEAN with HEATER 

The Deep Clean with Heater option helps to ensure better 

soil and stain removal. Deep Clean uses a heater within 

the washer to maintain the selected temperature setting 

throughout the wash period. This option will add some 

additional time to the cycle based on which temperature 

is selected. It is a preset cycle setting on the Sanitary 

cycle. Deep Clean with Heater may be selected as an  

option with other cycles.
 

Press this button to set the dispensers for Oxi, Fabric  

Softener, or both so that the selected laundry product  

is added to the load at the correct time.
CYCLE SIGNAL

Use this option to adjust volume of the signal that sounds 

at end of cycle. A louder signal is helpful in removing 

items as soon as cycle is complete.
Press and hold the CYCLE SIGNAL button to illuminate 

the washer basket, making loading and unloading easier. 

The light comes on when the lid is opened, and turns  

off automatically when the lid is closed or when you  

press and hold the button again. If the lid is left open,  

the drum light will turn off on its own after a few minutes. 

If you turn on the drum light while the lid is closed, it  

will not automatically time out. You must press and hold 

the CYCLE SIGNAL button again to turn it off.

Not all features and cycles are available on all models.

Drum Light