Brocade Communications Systems Switch 53-1001762-01 ユーザーズマニュアル
102
Converged Enhanced Ethernet Command Reference
53-1001762-01
show lacp-sys-id
6
DRAFT: BROCADE CONFIDENTIAL
show lacp-sys-id
Displays the Link Aggregation Control Protocol (LACP) system ID and priority information.
Synopsis
show lacp sys-id
Operands
none
Defaults
There are no default configurations for this command.
Command
Modes
EXEC mode
Description
Use this command to display the LACP system ID and priority.
Usage
Guidelines
The system priority and the system Media Access Control (MAC) address make up the system
identification. The first two bytes are the system priority, and the last six bytes are the globally
administered individual MAC addresses associated with the system.
identification. The first two bytes are the system priority, and the last six bytes are the globally
administered individual MAC addresses associated with the system.
Examples
To display the local system ID:
switch#show lacp sys-id
% System 8000,00-05-1e-76-1a-a6
See Also
none