Behringer Europower PMP960M パンフレット
Page 3 of 7
Internal switch-mode power supply,
noise-free audio, superior
transient response and very low
power consumption
noise-free audio, superior
transient response and very low
power consumption
Rack mount brackets included
High-quality components and
exceptionally rugged construction
ensure long life
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
BEHRINGER Germany
This is where the FBQ feature comes
in particularly handy. Press the FBQ IN
switch to activate the Feedback Detection
System. Trouble frequencies are indicated
by brightly lit fader LEDs. Just lower
the level of the respective frequency
range until feedback disappears and the
LED goes out.
switch to activate the Feedback Detection
System. Trouble frequencies are indicated
by brightly lit fader LEDs. Just lower
the level of the respective frequency
range until feedback disappears and the
LED goes out.
The FX RET controls add the
selected effect signal to the main
or monitor mix. When both are
completely counterclockwise, no effect
is applied. The 2TR IN control adjusts
the volume of the 2 Track signal, if you
have connected one.
or monitor mix. When both are
completely counterclockwise, no effect
is applied. The 2TR IN control adjusts
the volume of the 2 Track signal, if you
have connected one.
Use the MAIN MASTER/MONITOR
MASTER controls to adjust the main and
monitor output signals, respectively.
The 5-digit LED meters give you a
visual representation of these volumes.
The upper LIM LED illuminates when
output levels are too high, activating the
internal amp protection circuit.
monitor output signals, respectively.
The 5-digit LED meters give you a
visual representation of these volumes.
The upper LIM LED illuminates when
output levels are too high, activating the
internal amp protection circuit.
PMP980S’ POWER AMP switch
toggles between three operating modes:
STEREO (main left and right outputs),
MON/MONO (Output A can be used to
power Monitors and Output B to power
Mains in mono) and BRIDGE (the power
outputs of A and B on the back panel
are added and provided at OUTPUT B).
The PMP960M provides similar options:
MAIN/MAIN Bridge (outputs of A and
STEREO (main left and right outputs),
MON/MONO (Output A can be used to
power Monitors and Output B to power
Mains in mono) and BRIDGE (the power
outputs of A and B on the back panel
are added and provided at OUTPUT B).
The PMP960M provides similar options:
MAIN/MAIN Bridge (outputs of A and
B are added and provided at OUTPUT
B), MAIN/MAIN non-Bridge (dual mono
amps), and MAIN/MON mono (Output A
can be used to power Mains and Output
B to power Monitors). This clever
functionality enables you to power both
your mains and monitors withoutthe
need for an additional power amp just for
your monitors.
B), MAIN/MAIN non-Bridge (dual mono
amps), and MAIN/MON mono (Output A
can be used to power Mains and Output
B to power Monitors). This clever
functionality enables you to power both
your mains and monitors withoutthe
need for an additional power amp just for
your monitors.
Directly below, you’ll find the SPEAKER
PROCESSING switch that activates a filter
in both models, adapting the mixer to the
frequency response of your loudspeakers.
in both models, adapting the mixer to the
frequency response of your loudspeakers.
Finally, the STANDBY switch lets you
mute all input channels during breaks,
preventing the microphones from picking
up noise or interference. You can leave all
faders untouched while you play a CD via
the CD/TAPE inputs.
preventing the microphones from picking
up noise or interference. You can leave all
faders untouched while you play a CD via
the CD/TAPE inputs.
Small, simple, superb
At just 20.75 lbs / 9.4 kg and
18.75 lbs / 8.5 kg respectively, the
PMP980S and PMP960M were designed
specifically for gigs that don’t call for a
massive PA system. Small, simple events
call for a lightweight, simple powered
mixer, and these are the most efficient,
affordable mixers for the job. They are
easy to learn, easy to operate, and with
so many incredible built-in features,
they make it easy to put on a show
in an instant.
PMP980S and PMP960M were designed
specifically for gigs that don’t call for a
massive PA system. Small, simple events
call for a lightweight, simple powered
mixer, and these are the most efficient,
affordable mixers for the job. They are
easy to learn, easy to operate, and with
so many incredible built-in features,
they make it easy to put on a show
in an instant.
Loudspeaker (monitor mix)
Dual Footswitch
PMP980S Front Panel
(Excerpt)
2 x BEHRINGER
B312A (Active)
WATTS
WATTS
EUROPOWER
PMP980S
PMP960M