West Elm Tiled Capiz Table Lamp 組み立て手順
tiled capiz table lamp grey
lampe à pied carrelé grise capiz
capiz lampara de baldozas gris para mesa
assembly instructions
le fait de monter des instructions
instrucciones de montaje
Page 1 of 3
2279164 - 03.04.10
IMPORTANT SAFETY INSTRUCTIONS:
•For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does not fi t
securely into your outlet, do not force it – contact a professional electrician. Use the plug with an extension cord only if it can be
fully inserted into the cord’s socket. Never alter the plug in any way.
•These instruction is provided for your safety. It is important that they are read carefully and completely before assembling fi xture.
•This fi xture has been rated for up to (1) 100-WATT MAXIMUM TYPE A STANDARD bulb (not included). To avoid the risk of fi re, do
•For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does not fi t
securely into your outlet, do not force it – contact a professional electrician. Use the plug with an extension cord only if it can be
fully inserted into the cord’s socket. Never alter the plug in any way.
•These instruction is provided for your safety. It is important that they are read carefully and completely before assembling fi xture.
•This fi xture has been rated for up to (1) 100-WATT MAXIMUM TYPE A STANDARD bulb (not included). To avoid the risk of fi re, do
not exceed the recommended wattage.
Warning:
•To reduce the risk of fi re, electrical shock, or personal injury, always turn off and unplug lamp and allow it to
cool prior to replacing light bulb.
•Do not touch bulb when fi xture is turned on. Do not look directly at lit bulb.
•Keep fl ammable materials away from lit bulb.
•To reduce the risk of fi re, electrical shock, or personal injury, always turn off and unplug lamp and allow it to
cool prior to replacing light bulb.
•Do not touch bulb when fi xture is turned on. Do not look directly at lit bulb.
•Keep fl ammable materials away from lit bulb.
Pre-assembly:
•Remove all parts and hardware from box along with any plastic protective packaging.
•Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
•Remove all parts and hardware from box along with any plastic protective packaging.
•Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Parts Enclosed:
•(1) Finial (A)
•(1) Harp Top ( B )
•(1) Harp (C)
•(2) Harp Caps (D)
•(1) Socket (E)
•(1) Saddle (F)
•(1) Shade (J)
•(1) Finial (A)
•(1) Harp Top ( B )
•(1) Harp (C)
•(2) Harp Caps (D)
•(1) Socket (E)
•(1) Saddle (F)
•(1) Shade (J)
To Assemble:
1.Insert the harp( C ) into the Saddle ( F ), and lower the two Harp caps (D) until they cover the two-pronged
saddle
2.Unscrew the fi nial (A) from the harp top ( B ). Place shade (J) over the assembled harp, making sure the top
extends through the hole at the top of the shade.
3.Attach the fi nial (A) and tighten to secure the shade.
4.Insert a bulb – Max 100 Watt (Type A) Standard (not included) into the socket (E).
1.Insert the harp( C ) into the Saddle ( F ), and lower the two Harp caps (D) until they cover the two-pronged
saddle
2.Unscrew the fi nial (A) from the harp top ( B ). Place shade (J) over the assembled harp, making sure the top
extends through the hole at the top of the shade.
3.Attach the fi nial (A) and tighten to secure the shade.
4.Insert a bulb – Max 100 Watt (Type A) Standard (not included) into the socket (E).
Care Instructions:
•Clean with soft dry cloth.
•Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.
•Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.
A
B
E
F
J
C
D