West Elm Radian Floor Lamp 組み立て手順

Important Safety Instructions:

·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If

the plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the

plug with an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in

any way.

·These instructions are provided for your safety. It is important that they are read carefully and

completely before assembling fixture.

·This fixture has been rated for up to

(1) 60-watt maximum type A bulb (not included)

. To avoid the

risk of fire, do not exceed the recommended wattage.

assembly instructions

05/08 5994934

page 1 of 1

Warning:

·To reduce the risk of fire, electrical shock or personal injury, always turn off

and unplug lamp and allow it to cool prior to replacing light bulb.

·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.

·Keep flammable materials away from lit bulb.

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally discarding

small parts or hardware.

Care instructions:

·Clean with soft, dry cloth.

·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.

Assembly Instructions:

1. Screw the pole (E) onto the base (F) .

2. Pull the wire from the base and screw the pole (D) onto the pole (E).

3. Turn the screw (C) onto the ring (B).

4. Insert one 60-watt maximum type A bulb (not included) into the

socket.

5. Plug into the proper electrical outlet and test fixture.

Radian Floor Lamp

Parts enclosed:

(1) Shade (A)

(1) Ring (B)

(1) Screw (C)

(1) Pole (D)

(1) Pole (E)

(1) Base (F)