West Elm Adjustable Leather Floor Lamp 組み立て手順

Important Safety Instructions:

·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If

the plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the

plug with an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in

any way.

·These instructions are provided for your safety. It is important that they are read carefully and

completely before assembling fixture.

·This fixture has been rated for up to

(1) 3-way 150-watt maximum type A bulb (not included)

. To

avoid the risk of fire, do not exceed the recommended wattage.

assembly instructions

05/08 6982342

page 1 of 1

Warning:

·To reduce the risk of fire, electrical shock or personal injury, always turn off

and unplug lamp and allow it to cool prior to replacing light bulb.

·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.

·Keep flammable materials away from lit bulb.

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally discarding

small parts or hardware.

Care instructions:

·Clean with soft, dry cloth.

·Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the lamp.

Assembly Instructions:

1. Insert the harp (C) into the saddle (F), and lower the two

harp caps (D) until they cover the two-pronged saddle.

2. Unscrew the finial (A) from the harp top (B). Place the

shade (I) over the assembled harp, making sure the top

extends through the hole at the top of the shade.

3. Attach the finial and tighten to secure the shade.

4. Insert one 3-WAY 150-watt maximum type A bulb (not

included) into the socket.

5. Plug into the proper electrical outlet and test fixture.

Note: You can adjust the hight by loosening the knob (H).

Adjustable Leather Floor Lamp

Parts enclosed:

(1) Finial (A)

(1) Harp Top (B)

(1) Harp (C)

(2) Harp Caps (D)

(1) Socket (E)

(1) Saddle (F)

(1) Removable Tube (G)

(1) Handgrip (H)

(1) Shade (I)

G
H