West Elm Adjustable Metal Table Lamp 組み立て手順
Important Safety Instructions:
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.
·This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fixture.
·This fixture has been rated for up to (1) ) 3-way 150-watt TYPE A standard bulb (not included). To avoid
the risk of fire, do not exceed the recommended wattage.
·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.
·This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fixture.
·This fixture has been rated for up to (1) ) 3-way 150-watt TYPE A standard bulb (not included). To avoid
the risk of fire, do not exceed the recommended wattage.
assembly instructions
adjustable metal table lamp
9359860/9352717/9352584/9762980/9763210 - 06/07
page 1 of 1
Warning:
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Parts enclosed:
(1) Finial (A)
(1) Harp Top (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Socket (E)
(1) Saddle (F)
(1) Ring Grip (G)
(1) Lamp Base (H)
(4) Legs (I)
(1) Shade (J)
(1) Finial (A)
(1) Harp Top (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Socket (E)
(1) Saddle (F)
(1) Ring Grip (G)
(1) Lamp Base (H)
(4) Legs (I)
(1) Shade (J)
Assembly Instructions:
1. Screw the Legs (I) into the Lamp Base (H) as shown.
2. Insert the harp (C) into the Saddle (F), and lower the two Harp caps (D) until they
cover the two-pronged saddle.
3. Unscrew the finial (A) from the harp top (B). Place shade (J) over the assembled
harp, making sure the top extends through the hole at the top of the shade.
4. Attach the finial and tighten to secure the shade.
5. Insert a bulb – Max 3-way 150 Watt (Type A) Standard (not included) into the
socket (E).
1. Screw the Legs (I) into the Lamp Base (H) as shown.
2. Insert the harp (C) into the Saddle (F), and lower the two Harp caps (D) until they
cover the two-pronged saddle.
3. Unscrew the finial (A) from the harp top (B). Place shade (J) over the assembled
harp, making sure the top extends through the hole at the top of the shade.
4. Attach the finial and tighten to secure the shade.
5. Insert a bulb – Max 3-way 150 Watt (Type A) Standard (not included) into the
socket (E).
Care instructions:
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the lamp.
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the lamp.
A
C
D
E
D
E
F
G
H
I
B
J