WatchGuard Technologies Firebox SOHO 6.1 ユーザーズマニュアル
Chapter 2: Installation
20
WatchGuard Firebox SOHO 6.1
numbered, Ethernet ports (labeled 0-3) on the SOHO 6.
Connect the other end into the Ethernet port of your computer.
Connect the other end into the Ethernet port of your computer.
The SOHO 6 is now connected to the Internet and your computer.
4
If you connect to the Internet using a DSL/cable modem,
restore the power to this device. When the indicator lights of
the modem stop flashing the modem is ready for use.
restore the power to this device. When the indicator lights of
the modem stop flashing the modem is ready for use.
5
Attach the AC adapter to the SOHO 6 and connect it to a power
source.
source.
6
Restart your computer.
For information on the factory default configuration options, see
“Default Factory Settings” on page 25. For specialized
configurations, see “Configure Your External Network” on
page 31, as well as, “Configure the Trusted Network” on page 36.
“Default Factory Settings” on page 25. For specialized
configurations, see “Configure Your External Network” on
page 31, as well as, “Configure the Trusted Network” on page 36.
Cabling the SOHO 6 for more than four
computers
computers
While there are only four, numbered, Ethernet ports (labeled 0-3)
on the back of the SOHO 6, it is possible to connect more
appliances to your SOHO 6 using network hubs.
on the back of the SOHO 6, it is possible to connect more
appliances to your SOHO 6 using network hubs.