WatchGuard Technologies Firebox SOHO 6.1 ユーザーズマニュアル
Chapter 4: Configure the Network Interfaces
36
WatchGuard Firebox SOHO 6.1
Configure the Trusted Network
By default, the SOHO 6 uses DHCP to assign addresses to
computers on your trusted network. In other words, every time
you connect a computer to the SOHO 6, either directly or through
a hub, it automatically attempts to obtain its addresses from the
SOHO 6. If you use a cerntralized DHCP server to hand out IP
addresses, the SOHO 6 has a DHCP Relay feature that forwards
the DHCP request to the specified DHCP server.
computers on your trusted network. In other words, every time
you connect a computer to the SOHO 6, either directly or through
a hub, it automatically attempts to obtain its addresses from the
SOHO 6. If you use a cerntralized DHCP server to hand out IP
addresses, the SOHO 6 has a DHCP Relay feature that forwards
the DHCP request to the specified DHCP server.
Configure DHCP Server and DHCP Relay
To configure DHCP server:
1
With your Web browser, go to the System Status page using the
Trusted IP address of the SOHO 6.
Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
Network => Trusted.
Network => Trusted.