Woodstock W1694 ユーザーズマニュアル

-21-

The blade guard protects the operator from the
cutterhead blades. It must be functioning cor-
rectly before performing any jointing operation. 

UNPLUG THE JOINTER!

Adjust the infeed table even with the out-
feed table.

Slide a piece of wood across the jointer as if
performing an actual jointing operation. 

• The blade guard should rotate enough to

allow the wood to pass over the cutter-
head (

Figure 30).

• Once the wood has passed over the cut-

terhead, the blade guard should swing
completely back over the cutterhead.

Swing the blade guard completely open and
release it.

• The blade guard should swing complete-

ly back over the cutterhead.

Figure 30. Blade guard in use.