Radio Shack 32-2057 ユーザーズマニュアル

1.  Set your output source’s volume to minimum and turn it 

on.

2.  Press POWER to turn on the mixer. 

3.  Turn on the audio input sources you want to mix.

4.  Preset the input signal levels and mix your audio input 

sources. Refer to the next two sections for details.

5.  When you are finished, turn off all connected audio 

sources (amplifiers, tape decks, and so on), and press 
POWER to turn off the mixer. 

To avoid overdriving a channel or prematurely mixing an 
audio input source, adjust your mixer to these settings:

ASSIGN A and ASSIGN B set to OFF.

, 

, and 

 set to 0.

MIC TREBLE and MIC BASS set to 0.

MASTER set to about 

.

CUE LEVEL set to 0.

For monaural output, set MONO/STEREO to MONO. 
For stereo output, set MONO/STEREO to STEREO.