Blaupunkt STOCKHOLM RCM 126 ユーザーズマニュアル
33
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
To programme the mute volume level,
proceed as follows:
•
proceed as follows:
•
Adjust the desired volume.
•
Press
for two seconds until you
hear a beep.
Now this volume level is stored as your
mute volume.
mute volume.
Extra function
Memory button in the DSC menu.
Memory button in the DSC menu.
4
FM
T
Press repeatedly to switch between
the FM memory banks I, II and T (Tra-
velstore).
When pressing this button, the system
will automatically switch to FM.
the FM memory banks I, II and T (Tra-
velstore).
When pressing this button, the system
will automatically switch to FM.
Extra function FM
T
To store the six most powerful stations
automatically with Travelstore:
Press FMT until you hear a beep or
“T-STORE” appears in the display.
automatically with Travelstore:
Press FMT until you hear a beep or
“T-STORE” appears in the display.
5
M•L - toggle switch
To toggle between medium and long
wave reception.
To toggle between medium and long
wave reception.
Switching on with the ignition being
switched off:
To keep on operating the set when the
ignition is switched off (KeyCard is in-
serted), proceed as follows:
Press ON after the double beep tone.
The unit will be turned on.
To avoid that the battery goes flat, the
system will be turned off automatically
after a playback time of one hour.
switched off:
To keep on operating the set when the
ignition is switched off (KeyCard is in-
serted), proceed as follows:
Press ON after the double beep tone.
The unit will be turned on.
To avoid that the battery goes flat, the
system will be turned off automatically
after a playback time of one hour.
2
VOL+ / VOL-
To alter the volume.
Each time the set is switched on, it will
play with the pre-adjusted volume
(VOL FIX).
You may also change the VOL FIX set-
ting (see chapter “DSC programming”).
To alter the volume.
Each time the set is switched on, it will
play with the pre-adjusted volume
(VOL FIX).
You may also change the VOL FIX set-
ting (see chapter “DSC programming”).
3
For instantly muting the volume.
By pressing the
By pressing the
button the volume
will be muted immediately. “MUTE” will
appear in the display.
The function is cancelled by pressing
button
appear in the display.
The function is cancelled by pressing
button
or VOL+.
When pressing VOL-, the normal vol-
ume will be by one grade lower than
the mute volume.
ume will be by one grade lower than
the mute volume.
Quick reference
1
Switching on/off with the ON button:
Press ON.
When switching the set on with the ON
button, the KeyCard has to be insert-
ed. The unit will play with the pre-
adjusted volume.
Press ON.
When switching the set on with the ON
button, the KeyCard has to be insert-
ed. The unit will play with the pre-
adjusted volume.
Switching on/off with the KeyCard:
The set has to be turned on via the ON
button.
The set has to be turned on via the ON
button.
Note:
Read the information in chapter “Key-
Card theft protection system”.
Read the information in chapter “Key-
Card theft protection system”.
Switching on/off via the ignition:
When connected correspondingly, the
set can also be turned on and off via
the vehicle ignition.
After the ignition has been switched
off, a double beep tone will remind you
that you should remove the KeyCard
before leaving your vehicle.
When connected correspondingly, the
set can also be turned on and off via
the vehicle ignition.
After the ignition has been switched
off, a double beep tone will remind you
that you should remove the KeyCard
before leaving your vehicle.
Stockh. RCM126 gb®
30.04.2002, 15:25 Uhr
33