Bühler 80" and 100" Drag Harrow FK353 ユーザーズマニュアル

                                              

                  

Drag Harrow 

 

 6

 

 

 

1. 

Assemble the hitch (#1), boom (#2) and braces (#3) using the hardware 
supplied. 

2. 

Mount the assembly on the tractor using the three point pins. 

3. 

Space the stakes according to the size of harrow sections used (see drawing 
on next page).  Mount the stakes using stake caps, ½” x 1 ½” hex bolts, ½” 
lock washers and ½” hex nuts.  Simultaneously fasten the 10-link drag chain 
between the stake and stake cap using the same bolts.  A 7/16” long spacer 
is fitted in the last link of drag chain.  The bolt goes through the spacer and 
prevents the chain from being clamped tight. 

4. 

Bolt the ¼” lift chains to the top of the stakes using 3/8” x 1 ½” hex bolts, flat 
washer and lock nuts.  Use about 21 links on the lift chain to attach the stake 
to the harrow section.