Brother P-Touch 2400 ユーザーズマニュアル

 

7

 

This machine is equipped with an interface connector, allowing you to print labels and stamps
that you have created with the P-touch Editor software installed on your IBM PC-compatible
computer or Macintosh.

 

1

 

Turn off both the P-touch and the computer.

 

2

 

Insert the small plug on the interface cable into the interface connector on the right side of
the P-touch.

 

☞

 

Only use the interface cable designed exclusively for this machine.

 

3

 

On an IBM PC-compatible: Insert the 9-pin plug into the serial (COM) port of your com-
puter and tighten the screws to lock it into place.
On a Macintosh: Insert the 8-pin plug into the printer (serial) port of your computer.

 

4

 

Turn on the P-touch, and then start up the computer.

 

5

 

Hold down 

 and press 

 to enter 

 

 mode.

 

☞

 

In 

 

 mode, the baud rate of the P-touch can be changed by holding down

 and pressing 

 until the desired setting appears (

 

, 

 

,

or 

 

). Release the keys to apply the desired setting.

Code

Code

'

?

.

'

Interface

?

.

Code

Code

Style

$

4

Style

$

4