BENDIX TCH-013-018 ユーザーズマニュアル
Technical
Bulletin
Bulletin No: TCH-013-018
Effective Date: 8/24/2009
Cancels: N/A
Page: 1 of 3
Subject:
Bendix
®
AT-3
™
Valve Leakage
When installing valve components on a vehicle, including service replacement parts, the installer needs to carefully
follow the installation guidelines. Not following these guidelines can lead to damage of the valve and reduced
vehicle braking. Bendix Commercial Vehicle Systems LLC has identifi ed that some Bendix
follow the installation guidelines. Not following these guidelines can lead to damage of the valve and reduced
vehicle braking. Bendix Commercial Vehicle Systems LLC has identifi ed that some Bendix
®
AT-3
™
solenoid
valve bodies have become damaged and may result in leakage. Bendix recommends that the crimp area
of the AT-3
of the AT-3
™
valve be inspected and replace the valve if this area has been found to have become loose.
See Figure 1.
The Bendix
®
AT-3
™
solenoid valve is a specialized air brake valve which may be used for several functions,
depending on the specifi c vehicle needs. Most typically, the AT-3
™
solenoid valve is used in the Bendix
®
ATC
automatic traction control and Bendix
®
ESP
®
stability systems. See Figure 2 for typical applications of the Bendix
AT-3
™
solenoid valve. One or two of these valves may be installed on a vehicle.
To identify if the AT-3
™
solenoid valve on your vehicle is damaged, perform the following inspection. Follow all
standard industry safety precautions, including, but not limited to, those included in this document.
1. Park the vehicle on a level surface and block the wheels and/or hold the vehicle by means other than the air
brakes.
2. Drain the air pressure from all vehicle reservoirs.
3. Locate the AT-3
™
solenoid valve(s) on the vehicle. See Figure 2.
4. With the valve mounted on the vehicle, grasp the solenoid body with your hand and attempt to rock it, checking
for looseness of the crimp area. If the solenoid body moves, or rocks, then the valve is damaged and should
be replaced. Replacement valves are available through any Bendix authorized parts distribution center. If a
replacement valve is needed, be sure to follow the installation guidelines included with the valve to prevent
damage to the replacement valve.
be replaced. Replacement valves are available through any Bendix authorized parts distribution center. If a
replacement valve is needed, be sure to follow the installation guidelines included with the valve to prevent
damage to the replacement valve.
Continued ...
FIGURE 1 - THE BENDIX
®
AT-3
™
SOLENOID VALVE
Electrical
Connector
Solenoid Body
Valve Body
Permitted
Clamp
Location
Clamp From
Both Sides of
Mounting Hole
Flange
Permitted
Clamp
Location
Never Clamp
Using Solenoid
Body
Crimp Area
Supply Port
Mounting Holes
Service /
Exhaust
Port
Delivery
Port