Behringer B-Control Deejay BCD3000 ユーザーズマニュアル

B-CONTROL DEEJAY BCD3000 User Manual

The reception of MIDI data also allows for transmitting commands from 

third-party DJ software to your BCD3000. Although this function is not necessary 

to control the device from the software, you can still display the switching status 

of button LEDs, which enables you to work more intuitively.
All button LEDs receive MIDI control change data (on/off). If the controller value 

transmitted is between 0 and 63, this value corresponds to the switched-off 

status (LED off). If the value is 64 or higher (max. 127), the LED illuminates.

DECK A

LOW KILL 

MID KILL 

HIGH KILL

24 

23 

22

RELOOP 

SYNC 

SCRATCH

21 

20 

19

PLAY 

CUE

18 

17

DECK B

LOW KILL

MID KILL

HIGH KILL

16

15

14

RELOOP

SYNC

SCRATCH

13

12

11

PLAY

CUE

10

9

INPUT SELECT

EXT IN A

EXT IN B

8

7

FX CONTROL

ON (FX unit active)

FX ▼ (preset down)

FX ▲ (preset up)

ACTION (or TAP)

6

5

4

3

CUE SELECT 

CUE A

CUE B

2

1

KEY DECK A+B

KEY DECK A+B*

25

Table 6.5: MIDI commands for receiving button LED statuses

Data request for all moving elements:
If the “Data Request” command (demand for data) is sent from a suitable 

software application to the BCD3000 as “Control Change” command (100) 

on MIDI channel 1, the B-CONTROL transmits its current controls settings to the 

MIDI or DJ software application. This affects all knobs and faders apart from both 

wheels and buttons.

CH. 1

100

Table 6.6: Controller for data request

Selecting the input channel:
You can select the analog input A (see chapter 2.3) via MIDI. To do this, 

a program change command must be sent to the BCD3000.

PHONO A IN

CH. 1

Program Change 0

MIC IN

CH. 1

Program Change 1

Table 6.7: Switching the analog input using program change commands

Acceleration behavior of the Wheels: 
Both wheels are automatically selected when the acceleration option is switched 

on. The quicker you turn one of the wheels, the stronger the value changes. 

In TRAKTOR 3 LE, this means the following:

In PLAY mode, you can speed up or slow down the track quicker

In PAUSE mode, you can move quicker through the track

The value change relates directly to the wheel’s speed when scrolled manually. 

When the SCRATCH button is activated, the acceleration is temporarily turned off 

in order to ensure an optimum scratch behavior.
In case you want to deactivate the acceleration when using other MIDI 

software applications, apply a MIDI command that is transmitted from the MIDI 

application to the BCD3000. After doing so, the value changes will be constant 

when scrolling the wheel (left turn: 63, right turn: 65), regardless how quick.

CH. 1

99

0-63

Wheels Acceleration = off

64-127

Wheels Acceleration = on 

(default)

Table 6.8: Switching between wheels’ accelerations

You will need a large number of cables for different applications. The illustrations 

below show how the connectors should be wired. Be sure to use only 

high-grade cables.
The microphone input of the BCD3000 is electronically balanced to avoid 

hum problems.
Of course, you can also connect unbalanced microphones to the balanced input. 

In this case, connect pin 1 and pin 3.

For unbalanced use, pin 1 and pin 3 

have to be bridged

1 = ground/shield

2 = hot (+ve)

3 = cold (-ve)

1

2

3

1

2

3

Fig. 7.1: XLR connector

Fig. 7.2: ¼" TRS headphones connector