Brother FAX 1030e ユーザーズマニュアル
48
Chapter 8
How Does the Caller ID Work?
The Caller ID Appears on the Display When Your Telephone Rings
As your telephone rings, the screen displays the caller’s phone number. If the callers name is stored
in your machine as a Speed Dial, or One Touch dial, the callers name will be displayed. Once you
pick up the handset, the caller’s ID disappears. TELEPHONE/FAX will appear on the display.
in your machine as a Speed Dial, or One Touch dial, the callers name will be displayed. Once you
pick up the handset, the caller’s ID disappears. TELEPHONE/FAX will appear on the display.
The Caller ID is Stored in Your Machine’s Memory
The machine can store a maximum of the last 30 incoming caller IDs in the memory, along with the
time and date of reception. The 31st call will cause the oldest ID to be erased.
time and date of reception. The 31st call will cause the oldest ID to be erased.
The Caller ID information stored in the memory can be used for the following.
■ Selecting a Caller ID from the Memory for Call Reply.
■ Selecting a Caller ID from the Memory for Call Reply.
You can scroll through the Caller IDs on the display and select one for your machine to dial.
(See below)
(See below)
■ Printing the Caller ID List.
You can review calls you received by checking the Caller IDs in memory. This report will list
the Date, Time, Phone Number (Caller ID), and type of call (Comment).
the Date, Time, Phone Number (Caller ID), and type of call (Comment).
Selecting a Caller ID from the Memory for Call Reply
You can display the caller IDs that are stored in the memory and select the caller you want your
machine to dial. Call Reply is a convenient feature whereby your Brother fax can dial back a
voice/fax call “on-hook” to the opposite party associated with a Caller ID number which has been
captured into memory. This saves you from having to copy and dial back to that number manually.
machine to dial. Call Reply is a convenient feature whereby your Brother fax can dial back a
voice/fax call “on-hook” to the opposite party associated with a Caller ID number which has been
captured into memory. This saves you from having to copy and dial back to that number manually.
1
Press Menu/Set, 0, 2. The screen displays;
2
Press
or
to select DISPLAY ID, and press
Menu/Set. The caller ID of the last call will appear on
the display. If no ID is stored, the beeper will sound and
NO CALLER ID will appear on the display.
the display. If no ID is stored, the beeper will sound and
NO CALLER ID will appear on the display.
3
Press
or
to scroll through the Caller IDs in the memory, and press Menu/Set to
automatically dial the Caller ID number. Wait until the screen prompts you to press the
Fax Start key.
Fax Start key.
■ If # UNAVAILABLE appears on the display, it means that the call came from
outside your caller ID service area. *
■ If # WITHHELD appears on the display, it means the caller intentionally blocked
the transmission of his/her ID. *
■ If no caller ID was transmitted to your fax machine, PICK UP PHONE will
remain on the display.
* Depends on network Function.
Please set up the number of rings to more than 02 in the Ring Delay (see Setting
the Ring Delay, page 25) before you use the Caller ID. If you set up the number of
rings to 01, you cannot receive the Caller ID.
the Ring Delay, page 25) before you use the Caller ID. If you set up the number of
rings to 01, you cannot receive the Caller ID.
DISPLAY ID
SELECT & SET