Brother P-TOUCH PT-97OOPC オーナーマニュアル
20
5
Select the desired model, and then click
[OK].
Follow the on-screen instructions of the
driver installation.
[OK].
Follow the on-screen instructions of the
driver installation.
6
When instructed, connect your printer to
the computer by using the USB cable,
and then turn on the printer.
the computer by using the USB cable,
and then turn on the printer.
7
Once the printer is detected, the driver
will automatically be installed.
will automatically be installed.
8
When instructed to register your printer
online, select a registration method and
click [Next].
If you have selected to register the
product online, your default internet
browser will be launched in a new
window.
online, select a registration method and
click [Next].
If you have selected to register the
product online, your default internet
browser will be launched in a new
window.
9
When instructed to download the
optional tools, select your choice and
click [Next].
• If you choose “Yes, display the page”,
optional tools, select your choice and
click [Next].
• If you choose “Yes, display the page”,
you will go to the web site “solutions
center” page before finishing the
installation. (recommended)
[Select your region/country]-[Choose
your product]-[Downloads]
center” page before finishing the
installation. (recommended)
[Select your region/country]-[Choose
your product]-[Downloads]
• If you choose “No, do not display the
page”, you will continue the
installation.
installation.
0
Click [Finish].
The software installation is now complete.
Restart your computer if you are
instructed to do so.
The software installation is now complete.
Restart your computer if you are
instructed to do so.
a
Start the software.
Click “Start” - “All Programs (Programs)” -
“Brother P-touch” - “P-touch Editor 5.0”
to start P-touch Editor 5.0.
Click “Start” - “All Programs (Programs)” -
“Brother P-touch” - “P-touch Editor 5.0”
to start P-touch Editor 5.0.
When using Mac OS
®
This section explains how to install P-touch
Editor 5.0 and printer driver.
Editor 5.0 and printer driver.
Below is the example for Mac OS
®
X 10.5.7.
1
Start up Macintosh
®
, and insert the CD-
ROM into the CD-ROM drive.
Double click the “PT_Series” (CD-ROM)
icon.
Double click the “PT_Series” (CD-ROM)
icon.
DC IN 2
4V
USB port
USB cable
AC adapter jack
AC adapter
Note
●
To download the optional tools later, you
can find them on this Web site:
http://solutions.brother.com/
[Select your region/country] - [Choose
your product] - [Downloads]
can find them on this Web site:
http://solutions.brother.com/
[Select your region/country] - [Choose
your product] - [Downloads]
Note
●
Until P-touch Editor 5.0 installation is
completed, do not connect the printer to
Macintosh
completed, do not connect the printer to
Macintosh
®
. Make sure the USB cable is
not connected until you are instructed to
connect it.
connect it.
●
You must be logged on as a user with
administrator privileges to install this
software.
administrator privileges to install this
software.
●
Turn off the printer with the power button
and then with the main power switch.
and then with the main power switch.