Weslo HNSC05700 オーナーマニュアル

Open the quick-release lever. Depress the lock pin on the
stem and slide the stem down into the upright. Close the
quick-release lever. 

Depress the lock pins and remove the handles from the
stem. Press the handles into the storage clip on the upright.

Pull the thumb tab and pivot the upright down until it locks
in the horizontal position.  

Thumb Tab

Storage Clip

Handle

Upright

If the quick release doesn’t hold the stem snug in place, you
will need to adjust it. Open the quick-release lever. Turn the
adjustment nut clockwise one half turn while keeping the lever
from turning. Close the lever. Repeat this procedure until the
stem is held snug in place.

If the quick release is too snug to close, it will need to be
adjusted. While the quick-release lever is open, turn the adjust-
ment nut counterclockwise one quarter turn while keeping the
lever from turning. Close the lever. Repeat this procedure until
the stem is held snug in place and the quick release is closed.

Adjustment

Nut

Open

Close

Lever

Quick

Release

Road debris and abraded material from the rear wheel may
accumulate under the brake. Clean the underside of the brake
periodically to ensure maximum braking capability.

Brake