Brother MFC-P2500 オーナーマニュアル
1-8
Choose a Location
Please take note of the following before using the printer.
Power Supply
•
Use the printer within the specified power range.
AC power: ±10% of the rated power voltage in your country
Frequency: 50 Hz (220 V– 240 V) or 50/60 Hz (110–120 V)
Frequency: 50 Hz (220 V– 240 V) or 50/60 Hz (110–120 V)
•
The power cord, including extensions, should not exceed 5 meters (16.5
feet).
feet).
•
Do not share the same power circuit with other high-power appliances,
particularly an air conditioner, copier or shredder. If you must use the
printer with these appliances, we recommend that you use an isolation
transformer or a high-frequency noise filter.
particularly an air conditioner, copier or shredder. If you must use the
printer with these appliances, we recommend that you use an isolation
transformer or a high-frequency noise filter.
•
Use a voltage regulator if the power source is not stable.
Environment
The printer should be installed near a power outlet, that is easily accessible.
•
Use the printer only within the following ranges of temperature and
humidity.
humidity.
Ambient
temperature: 10
°
C to 32.5
°
C (50_F to 90.5_F)
Ambient humidity:
20% to 80% (without condensation)
•
The printer should be used in a well ventilated room.
•
Place the printer on a flat, horizontal surface.
•
Keep the printer clean. Do not place the printer in a dusty place.
•
Do not place the printer where the vent for the printer fan is blocked. Keep
approximately 100 mm (3.4 inches) between the fan vent and the wall.
approximately 100 mm (3.4 inches) between the fan vent and the wall.
•
Do not place the printer where it will be exposed to direct sunlight. Use a
blind or a heavy curtain to protect the printer from direct if you must place
it near a window.
blind or a heavy curtain to protect the printer from direct if you must place
it near a window.