Encore electronic 802.11n ユーザーズマニュアル
DHCP Client Mode
Items
Information
Set DNS server
If your DNS provide by ISP is dynamic, choose
“Automatically”, if not choose “Manually” and enter the
DNS provided by your ISP in DNS 1, 2.
“Automatically”, if not choose “Manually” and enter the
DNS provided by your ISP in DNS 1, 2.
DHCP MTU
To enable the Maximum Transmission Unit of Router
setup. Any packet over this number will be chopped
up into suitable size before sending. Larger number
will enhance the transmission performance.
Enter your MTU number in the text-box to set the
limitation (default 1500bytes).
setup. Any packet over this number will be chopped
up into suitable size before sending. Larger number
will enhance the transmission performance.
Enter your MTU number in the text-box to set the
limitation (default 1500bytes).
Host Name
Name of this device.
Ping from WAN
Mark the check box to enable others detecting this
device from WAN, and clear the checkbox to disable.
device from WAN, and clear the checkbox to disable.
WAN Ethernet MAC Select to use the following MAC as the MAC while
serving Internet:
Original MAC: the MAC of the device.
Manual Settings: the MAC of your computer. Click on
the words in the bracket to clone your computer MAC
in the blank. You can also change the MAC numbers if
you need.
Original MAC: the MAC of the device.
Manual Settings: the MAC of your computer. Click on
the words in the bracket to clone your computer MAC
in the blank. You can also change the MAC numbers if
you need.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
11