Brother MFC-240C オーナーマニュアル
Chapter 2
16
How to load envelopes and post cards
2
a
Before loading, press the corners and
sides of the envelopes or post cards to
make them as flat as possible.
sides of the envelopes or post cards to
make them as flat as possible.
Note
If the envelopes or post cards are ‘double-
feeding,’ put one envelope in the paper
tray at a time.
feeding,’ put one envelope in the paper
tray at a time.
b
Put the envelopes or post cards into the
paper tray with the address side down
and the leading edge (top of the
envelopes) in first. Slide the paper side
guides (1) and paper length guide (2) to
fit the size of the envelopes or post
cards.
paper tray with the address side down
and the leading edge (top of the
envelopes) in first. Slide the paper side
guides (1) and paper length guide (2) to
fit the size of the envelopes or post
cards.
If you have problems when printing on
envelopes, try the following suggestions:
envelopes, try the following suggestions:
2
a
Open the envelope flap.
b
Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
side of the envelope or to the back edge
of the envelope when printing.
c
Adjust the size and margin in your
application.
application.
Note
When the machine ejects small paper
onto the output paper tray you may not be
able to reach it. Make sure printing has
finished, and then pull the tray completely
out of the machine.
onto the output paper tray you may not be
able to reach it. Make sure printing has
finished, and then pull the tray completely
out of the machine.
1
2