Brother HS-5300 クイック設定ガイド
11
Action 7-1: Installing the Printer Driver
Computer Requirements
The following are the minimum computer requirements to setup and operate
the printer.
the printer.
CPU:
80486 or higher
(Pentium recommended)
(Pentium recommended)
RAM:
8 MB or more for Windows 95, 3.1 / 3.11
(16 MB or more recommended)
(16 MB or more recommended)
Hard Disk Drive: 10Mbyte free space available
(more space is necessary for printing)
OS:
Windows 95, 3.1x
2 Note
Use only a shielded Interface cable that is IEEE 1284 compliant and less
than 1.8m (6 feet ) long.
Use only a shielded Interface cable that is IEEE 1284 compliant and less
than 1.8m (6 feet ) long.
Prepare Windows 95 for the Printer
1
.
Start Windows 95. The screen
shown on the right appears.
shown on the right appears.
2 Notes
If Windows 95 does not recognize your printer;
1. Click the Start button and choose Run.
2. Insert the supplied disk for Windows into your floppy disk drive.
3. Type A:SET UP and choose the OK button or press the Enter key.
After the installer starts, skip the following steps and follow the instructions
that appear on the screen.
1. Click the Start button and choose Run.
2. Insert the supplied disk for Windows into your floppy disk drive.
3. Type A:SET UP and choose the OK button or press the Enter key.
After the installer starts, skip the following steps and follow the instructions
that appear on the screen.