Brother HS-5000 オーナーマニュアル

USER’S GUIDE

7–12

English: HS3 User’s Guide, Chapter 7

Printouts are too dark or light.

You can adjust the brightness in Custom setting of
your printer driver. Refer to the printer driver HELP.

The printouts are not solid.

After setting the printer offline by pushing the Online
Button once, execute head cleaning by pushing the
Clean button while holding the 

 button.

You may also need to clean the printer interior. (Refer
to  “Cleaning the Printer Interior” in Chapter 6)
When you want to perform interior cleaning, WAIT
30 minutes after turning off the printer before starting
the cleaning.

Poor Transparency print
quality.

 Use only Brother Special Transparencies for this

printer.

 Select the appropriate ‘Envelope and

Transparency’ position of the head gap lever.

The ink on printouts flakes off.
Some colors might be lighter
than expected.

 You may be using thick paper.  Check the type of

media in the printer driver and select the ‘Thick
paper’ position of the head gap lever.

 You may be using the printer out of the

Vertical lines are not  straight.

Adjust the position of the head gap lever.

White horizontal lines exist or
the printed image is faint.

 After setting the printer offline by pushing the

Online Button once, execute head cleaning by
pushing the Clean button while holding the 

button.

 Set the Enhancement mode ON in the

Quality/Color tab of your printer driver.

The print image does not
match the printing area.

 Select the Recommended Paper setting of the

printer driver to get a wider printing area in
Windows 3.1x/95/98.

 You may need to adjust the margins in your

software to match the printable area.