Enfora GSM2228UG001 ユーザーズマニュアル

 

GSM2228UG001                                                                                                            Page 16 

 
There are two user-definable buttons on the Mini-MT.  The first button is factory-defined 
to set a geo-fence.  Depressing the Geo-Fence button will place a half-mile radius circular 
geo-fence around the Mini-MT.  When the Mini-MT exits the geo-fence an alert message 
will be sent via SMS message to the SMS Destination Address defined in the 
AT$SMSDA field.  (Messages and alerts can also be sent via GPRS packet data.  The 
user has the ability to control the IP and port that the packet data is transmitted to) 
 
The factory default configuration of the Mini-MT will not have any SMS Destination 
Addresses configured and will not be capable of generating SMS messages for Geo-
Fence events. 
 

” 

 
The Mini-MT  “” button is user-definable through the event engine.  The default state 
is to configure a ½ mile radius geo-fence at the current location. 

 
The Mini-MT “>” button is user-definable through the event engine.  This button 
function is not defined from the factory. 
 

 
The Mini-MT is capable of dialing an emergency number (AT$EMERNUM) and a 
dispatch number (AT$DSPATCH).  The default emergency number in the Mini-MT is 
“411.”  The provider should reconfigure this number to the correct emergency number for 
the region the Mini-MT will operate in. 
 
To set the emergency number to “911” enter the following text in the terminal window: 
 

AT$EMERNUM=“911” <enter> 
 
AT&W <enter> 
 

The first command sets the emergency number to 911 and the second command saves the 
setting.