Enfora GSM2228UG001 ユーザーズマニュアル
Mini-MT User Guide
Revision 1.02
Revision 1.02
8.3 Configuring the PC and Verifying Communications.
NOTE: The following examples use Windows 2000 and HyperTerminal. Any
Terminal program should work, using the parameters in Steps 7.3.1 and 7.3.2.
Terminal program should work, using the parameters in Steps 7.3.1 and 7.3.2.
8.3.1 Default Serial Parameters
Baud Rate:
115200 baud rate
Data Bits:
8
Stop Bits:
1
Parity:
None
Flow Control: None
8.3.2 Determine which COM port to use
On older computers, there is usually a built in COM port. This is normally COM1
With a USB connection, you will need to determine which COM port it is using.
With a USB connection, you will need to determine which COM port it is using.
1. Open up the System Properties window. This is done through the Control
Panel > System or right-click on My Computer and select Properties. Select
the Hardware Tab. On Windows 2000 the screen looks like the following:
the Hardware Tab. On Windows 2000 the screen looks like the following:
GSM2228UG001 Page 26