Enfora GSM2228UG001 ユーザーズマニュアル

 

The Mini-MT is capable of communicating with a server.  The following steps will guide 
you through a configuration that will demonstrate the data communication capabilities to 
the Enfora Test Server.  A valid SIM card from your carrier is required that allows GPRS 
data communications capability.   
 

 
To restore the Mini-MT to factory defaults send the following command: 

 
AT&F<CR> 

 
To save the current configuration to memory send the following command: 

 
AT&W<CR> 
 

Reset the modem with the following command: 
 

AT$RESET<CR> 
 

 
The following information will be required from the SIM card provider (refer to 
GSM0000AN019 – Network Configuration Worksheet): 
 

•  APN 

•  Username (if required) 

•  Password (if required) 
•  SIM PIN (if required) 

 
The following examples show how to configure the Mini-MT with a Cingular SIM card 
with the following data: 
 

•  APN=isp.cingular 

•  Username=ISP@CINGULARGPRS.COM 
•  Password=CINGULAR1 

•  SIM PIN=1234 

 

 

GSM2228UG001                                                                                                            Page 31