Brother MFC-8860 クイック設定ガイド
4
Setting Up the machine
Do NOT connect the interface cable.
Connecting the interface cable is
done during the software
installation process.
Connecting the interface cable is
done during the software
installation process.
1
Open the front cover by pressing the front
cover (1) release button.
cover (1) release button.
2
Unpack the drum unit and toner cartridge
assembly.
assembly.
3
Gently rock the drum assembly from side to
side several times to distribute the toner
evenly inside the assembly.
side several times to distribute the toner
evenly inside the assembly.
4
Put the drum unit assembly into the
machine until it clicks into place.
machine until it clicks into place.
5
Close the front cover of the machine.
1
Install the Drum Unit Assembly
(1)
Step 1