West Elm Loft Floor Lamp 組み立て手順
loft floor lamp
lampadaire de loft
desván lampara de piso
assembly instructions
instrucciones de montaje
Instrucciones de Ensamblaje
Page 1 of 3
03.29.10
D
C
B
A
Important Safety Instructions:
•For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug
with an extension cord only if it can be fully inserted into the cord’s socket. Never alter the plug in any way.
•This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fi xture. •This fi xture has been rated for up to (1) 100-watt TYPE A standard bulb (not included).
To avoid the risk of fi re, do not exceed the recommended wattage.
•For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug
with an extension cord only if it can be fully inserted into the cord’s socket. Never alter the plug in any way.
•This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fi xture. •This fi xture has been rated for up to (1) 100-watt TYPE A standard bulb (not included).
To avoid the risk of fi re, do not exceed the recommended wattage.
Warning:
•To reduce the risk of fi re, electrical shock or personal injury, always turn off and unplug lamp and allow it
to cool prior to replacing light bulb.
•Do not touch bulb when fi xture is turned on. Do not look directly at lit bulb.
•Keep fl ammable materials away from lit bulb.
•To reduce the risk of fi re, electrical shock or personal injury, always turn off and unplug lamp and allow it
to cool prior to replacing light bulb.
•Do not touch bulb when fi xture is turned on. Do not look directly at lit bulb.
•Keep fl ammable materials away from lit bulb.
Pre-assembly:
•Remove all parts and hardware from box along with any plas
tic protective packaging.
•Do not discard any contents until after assembly is complete
to avoid accidentally discarding small parts or hardware.
•Remove all parts and hardware from box along with any plas
tic protective packaging.
•Do not discard any contents until after assembly is complete
to avoid accidentally discarding small parts or hardware.
Parts and hardware enclosed:
(1) Lamp Base (A)
(1) Pole (B)
(1) Pole (D)
(1) Wood Nut (C)
(1) Lamp Base (A)
(1) Pole (B)
(1) Pole (D)
(1) Wood Nut (C)
Assembly Instructions:
1.Screw the Pole (B) onto the Lamp Base (A).
2. Adjust the Pole (D) height, screw the Wood Nut (C), and
tighten by hand.
3. Insert the bulb -Max 100 Watt (Type A) standard-into the
socket.
1.Screw the Pole (B) onto the Lamp Base (A).
2. Adjust the Pole (D) height, screw the Wood Nut (C), and
tighten by hand.
3. Insert the bulb -Max 100 Watt (Type A) standard-into the
socket.
Care instructions:
•Clean with soft, dry cloth.
•Always avoid the use of harsh chemicals or abrasive cleaners
as they may cause damage to the lamp.
•Clean with soft, dry cloth.
•Always avoid the use of harsh chemicals or abrasive cleaners
as they may cause damage to the lamp.