West Elm Cada Table Lamp 組み立て手順
Important Safety Instructions:
• For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug
with an extension cord only if it can be fully inserted into the cord’s socket. Never alter the plug in any way.
The instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fi xture.
• This fi xture has been rated for up to 60 Watt TYPE A standard incandescent light bulb (not included) or 13-
watt compact fl uorescent bulb (included). To avoid the risk of fi re, do not exceed the recommended watt
age.
• Save this instruction.
WARNING:
• To reduce the risk of fi re, electrical shock or personal injury, always turn off light fi xture and unplug, allow
ing it to cool prior to replacing light bulb.
• Do not touch bulb when fi xture is turned on.
• Do not look directly at lit bulb. Keep fl ammable materials away from lit bulb.
Pre-assembly:
•Remove all parts and hardware from box along with any plastic
protective packaging. Do not discard any contents until after
assembly is complete to avoid accidentally discarding small parts or hardware.
• For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug
with an extension cord only if it can be fully inserted into the cord’s socket. Never alter the plug in any way.
The instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fi xture.
• This fi xture has been rated for up to 60 Watt TYPE A standard incandescent light bulb (not included) or 13-
watt compact fl uorescent bulb (included). To avoid the risk of fi re, do not exceed the recommended watt
age.
• Save this instruction.
WARNING:
• To reduce the risk of fi re, electrical shock or personal injury, always turn off light fi xture and unplug, allow
ing it to cool prior to replacing light bulb.
• Do not touch bulb when fi xture is turned on.
• Do not look directly at lit bulb. Keep fl ammable materials away from lit bulb.
Pre-assembly:
•Remove all parts and hardware from box along with any plastic
protective packaging. Do not discard any contents until after
assembly is complete to avoid accidentally discarding small parts or hardware.
Parts enclosed:
(1)Finial (A)
(1)Harp Top (B)
(1)Harp (C)
(2)Harp Caps (D)
(1)Socket (E)
(1)Saddle (F)
(1)Shade (J)
(1)Finial (A)
(1)Harp Top (B)
(1)Harp (C)
(2)Harp Caps (D)
(1)Socket (E)
(1)Saddle (F)
(1)Shade (J)
To Assemble:
1. Insert the harp (C) into the Saddle (F), and lower the two Harp caps
(D) until they cover the two-pronged saddle (F).
2. Unscrew the Finial (A) from the Harp top (B). Place shade (J)
over the assembled harp, making sure the top extends through
the hole at the top of the shade (J).
3. Insert a bulb-Max 60 watt maximum TYPE A standard incandescent
light bulb (not included) or 13-watt compact fl uorescent bulb into the
socket (E). DO NOT EXCEED SPECIFIED WATTAGE.
4. Plug fi xture into the proper electrical outlet and test fi xture.
Care instructions:
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fi xture’s fi n
-ish
1. Insert the harp (C) into the Saddle (F), and lower the two Harp caps
(D) until they cover the two-pronged saddle (F).
2. Unscrew the Finial (A) from the Harp top (B). Place shade (J)
over the assembled harp, making sure the top extends through
the hole at the top of the shade (J).
3. Insert a bulb-Max 60 watt maximum TYPE A standard incandescent
light bulb (not included) or 13-watt compact fl uorescent bulb into the
socket (E). DO NOT EXCEED SPECIFIED WATTAGE.
4. Plug fi xture into the proper electrical outlet and test fi xture.
Care instructions:
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fi xture’s fi n
-ish