West Elm Taper Shade Floor Lamp 組み立て手順
Important Safety Instructions:
• For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug
with an extension cord only if it can be fully inserted into the cord’s socket. Never alter the plug in any way.
• The instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fi xture.
• This fi xture has been rated for up to 60 Watt TYPE A standard incandescent light bulb (not included) or 13-
watt compact fl uorescent bulb (included). To avoid the risk of fi re, do not exceed the recommended wattage.
• Save this instruction.
• For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug
with an extension cord only if it can be fully inserted into the cord’s socket. Never alter the plug in any way.
• The instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fi xture.
• This fi xture has been rated for up to 60 Watt TYPE A standard incandescent light bulb (not included) or 13-
watt compact fl uorescent bulb (included). To avoid the risk of fi re, do not exceed the recommended wattage.
• Save this instruction.
WARNING:
• To reduce the risk of fi re, electrical shock or personal injury, always turn off light fi xture and unplug, allow-
ing it to cool prior to replacing light bulb.
• Do not touch bulb when fi xture is turned on.
• Do not look directly at lit bulb. Keep fl ammable materials away from lit bulb.
• To reduce the risk of fi re, electrical shock or personal injury, always turn off light fi xture and unplug, allow-
ing it to cool prior to replacing light bulb.
• Do not touch bulb when fi xture is turned on.
• Do not look directly at lit bulb. Keep fl ammable materials away from lit bulb.
Pre-assembly:
•Remove all parts and hardware from box along
with any plastic protective packaging. Do not
discard any contents until after assembly is
complete to avoid accidentally discarding small
parts or hardware.
•Remove all parts and hardware from box along
with any plastic protective packaging. Do not
discard any contents until after assembly is
complete to avoid accidentally discarding small
parts or hardware.
Parts enclosed:
(1) Top tube (A)
(2) Assembled Arms (B)
(2) Shades (C)
(2) Pivots (D)
(2) Handgrips (E)
(1) Bottom tube (F)
(1) Lamp Base (G)
(4) Adjustment keys (H)
(2) Sockets (I)
(1) Top tube (A)
(2) Assembled Arms (B)
(2) Shades (C)
(2) Pivots (D)
(2) Handgrips (E)
(1) Bottom tube (F)
(1) Lamp Base (G)
(4) Adjustment keys (H)
(2) Sockets (I)