Boxlight PREMIERE 30HD ユーザーズマニュアル
Easy to Use F
unctions
49
Deinterlace
This function allows you to determine the type of incoming video content-film, static interlaced video and
moving interlaced video. Different algorithms are applied for each of the content types.
moving interlaced video. Different algorithms are applied for each of the content types.
Select “Deinterlace” from the
“Options” menu on the menu screen.
For operating the menu screen, see
Note
• In PAL50Hz or SECAM, the 2:2 pull down
enhancement will be enabled only in film
mode, after the film source has been
entered.
mode, after the film source has been
entered.
Selected item
Description
DCTI
This function is useful to
enhance video by replacing
the edges of the video with
edges that have steeper rise
and fall times. DCTI turns
sloped or sinusoidal
waveforms into rectangular
or square waveforms with
the same duty cycles and
peak-to-peak amplitude. It's
useful for 4:1:1 video
sources. The range is from
0 to 7.
enhance video by replacing
the edges of the video with
edges that have steeper rise
and fall times. DCTI turns
sloped or sinusoidal
waveforms into rectangular
or square waveforms with
the same duty cycles and
peak-to-peak amplitude. It's
useful for 4:1:1 video
sources. The range is from
0 to 7.
Video on film
(VOF)
This function is used to
identify video artifacts while
in film mode. VOF attempts
to repair the artifacts using
the low-angle interpolator
while remaining in film
mode.
identify video artifacts while
in film mode. VOF attempts
to repair the artifacts using
the low-angle interpolator
while remaining in film
mode.
Film Mode
Reproduces the image of
the film source clearly.
Displays the optimized
image of film transformed
with 3:2 pull down (NTSC
and PAL60Hz)or 2:2 pull
down (PAL 50Hz and
SECAM) enhancement to
progressive mode images.
the film source clearly.
Displays the optimized
image of film transformed
with 3:2 pull down (NTSC
and PAL60Hz)or 2:2 pull
down (PAL 50Hz and
SECAM) enhancement to
progressive mode images.
Main Menu