West Elm Tall Carved Glass Table Lamp 組み立て手順
tall carved glass table lamp
grande lampe de table en verre sculpté
lampara alta de vidrio tallado para mesa
assembly instructions
instrucciones de montaje
Instrucciones de Ensamblaje
Page 1 of 3
2358174 - 03.30.10
A
J
F
D
C
B
E
Important Safety Instructions:
•For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug
with an extension cord only if it can be fully inserted into the cord’s socket. Never alter the plug in any way.
•This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fi xture.
•This fi xture has been rated for up to (1) 100-watt TYPE A standard bulb (not included). To avoid the risk of
fi re, do not exceed the recommended wattage.
Warning:
•To reduce the risk of fi re, electrical shock or personal injury, always turn off and unplug lamp and allow it to
cool prior to replacing light bulb.
•Do not touch bulb when fi xture is turned on. Do not look directly at lit bulb.
•Keep fl ammable materials away from lit bulb
•For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fi t securely into your outlet, do not force it-contact a professional electrician. Use the plug
with an extension cord only if it can be fully inserted into the cord’s socket. Never alter the plug in any way.
•This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fi xture.
•This fi xture has been rated for up to (1) 100-watt TYPE A standard bulb (not included). To avoid the risk of
fi re, do not exceed the recommended wattage.
Warning:
•To reduce the risk of fi re, electrical shock or personal injury, always turn off and unplug lamp and allow it to
cool prior to replacing light bulb.
•Do not touch bulb when fi xture is turned on. Do not look directly at lit bulb.
•Keep fl ammable materials away from lit bulb
Pre-assembly:
•Remove all parts and hardware from box along with any plastic
protective packaging.
•Do not discard any contents until after assembly is complete to
avoid accidentally discarding small parts or hardware.
•Remove all parts and hardware from box along with any plastic
protective packaging.
•Do not discard any contents until after assembly is complete to
avoid accidentally discarding small parts or hardware.
Parts enclosed:
(1) Finial (A)
(1) Harp Top (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Socket (E)
(1) Saddle (F)
(1) Finial (A)
(1) Harp Top (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Socket (E)
(1) Saddle (F)
Assembly Instructions:
1.Insert the harp (C) into the Saddle (F), and lower the two Harp
caps (D) until they cover the two-pronged saddle. 2.Unscrew the
fi nial (A) from the harp top (B). Place shade (J) over the assem
bled harp, making sure the top extends through the hole at the
top of the shade.
3. Attach the fi nial (A) and tighten to secure the shade.
4. Insert a bulb – Max 100 Watt (Type A) Standard (not included)
into the socket (E)
1.Insert the harp (C) into the Saddle (F), and lower the two Harp
caps (D) until they cover the two-pronged saddle. 2.Unscrew the
fi nial (A) from the harp top (B). Place shade (J) over the assem
bled harp, making sure the top extends through the hole at the
top of the shade.
3. Attach the fi nial (A) and tighten to secure the shade.
4. Insert a bulb – Max 100 Watt (Type A) Standard (not included)
into the socket (E)
Care instructions:
•Clean with soft, dry cloth.
•Always avoid the use of harsh chemicals or abrasive cleaners as
they may cause damage to the lamp.
•Clean with soft, dry cloth.
•Always avoid the use of harsh chemicals or abrasive cleaners as
they may cause damage to the lamp.