West Elm Tillary Modular Seating 組み立て手順
: tillary modular seating
assembly instructions
CARE INSTRUCTIONS.
Upholstered seat: Spot clean only. Vacuum or brush with a soft brush regularly, at least once a month. For spills,
immediately dab with a towel dampened with club soda or distilled water. To clean, use a commercial dry foam
upholstery cleaner. Follow manufacturer’s directions. Test for color fastness first on the fabric on the bottom of the seat.
Upholstered seat: Spot clean only. Vacuum or brush with a soft brush regularly, at least once a month. For spills,
immediately dab with a towel dampened with club soda or distilled water. To clean, use a commercial dry foam
upholstery cleaner. Follow manufacturer’s directions. Test for color fastness first on the fabric on the bottom of the seat.
Legs: Wipe with a soft, dry cloth. To protect the finish, avoid the use of all chemicals and household cleaners.
9423187/9423062 - 03/07
1. Set the upholstered seat so that the pre-drilled holes on the bottom of seat are accessible as shown.
2. Insert leg with bolt through hole as shown. Tighten by hand. When fully tightened, the pre-drilled hole at the corner of
the leg bottom will align with the corner of the sofa, as shown.
the leg bottom will align with the corner of the sofa, as shown.
!
Do not throw away packaging materials until assembly is complete.
!
Assemble this item on a soft, clean surface, such as cardboard or carpet, to protect the finish.